Showing 1–16 of 546 results
4 Stud Fitting (40° bracket) AMF Bruns 200211247 4-Stud Fitting (40° bracket) features a discontinued 40° angled design with threaded hole and red stripe identification, superseded by H150616 for occupant restraints only. KEY FEATURES: 40° Bracket Angle: Optimized positioning for occupant belt retractors. Threaded Mounting Hole: Secure bolt connection to retractor assemblies. Red Stripe ID:…
200269390 | Floor Pocket For L-Track | 2 PACK AMF Bruns 200269390X2 L-Track Floor Pockets (2-Pack) provide discreet, surface-mounted oval covers for wheelchair tie-down fittings, minimizing caster interference with included M10 hardware. KIT INCLUDES: 2 × Oval L-Track Floor Pockets 2 × M10 Bolts (70 mm / 2.76″ long) 2 × Washers 2 × Nuts…
4 QRT Standard Retractors w/ Slide ‘N Click Fittings, no floor anchors included | Q-8201-SC2 Kit Includes : 4 (Four) Q’Straint Standard Retractors with Slide ‘N Click End Fittings ***Kit does not include Q8-7580-A floor anchors, see the Q-8201-SC for a kit with them included. FEATURES SINGLE TENSIONING KNOB – Safely secures wheelchair and occupant in under…
A-Track Mounting Hardware | Q8-6500-A Mounting hardware for Q’straint QRT retractor series, allowing retractor to attach to A-Track. Designed to be used with Q’straint retractors. Clicks in to A-Track. SKU: Q8-6500-A
Integrated Combination Belt – Titan Series Sure-Lok AL700 Titan Series Integrated Combination Belt combines retractable shoulder and lap belts into a single unit with triangular lap fittings that attach directly to rear tie-down retractor studs for seamless WC19 occupant securement in Titan systems. KEY FEATURES: Triangular Lap Fittings: Direct-connect to Titan retractor studs (AL700907S/AL700855S). Fully…
Aluminum Guide Rail for AMF-Bruns L-Track, Lockable AMF Bruns 10011173 Aluminum Guide Rails precisely position wheelchair tie-downs in L-Track or Protektor floor systems using hand-tightened lockable red knobs. Included: Qty (2) Two Aluminum Guide Rail FEATURES: Lockable Positioning: Red knob twist lock secures rail at precise tie-down locations. Dual Track Compatibility: Fits AMF Bruns L-Track and…
Aluminum Guide Rail for AMF-Bruns L-Track, Lockable Aluminum Guide Rail for AMF-Bruns L-Track, Lockable (SKU: 10011173) simplifies precise positioning of wheelchair tie-downs by snapping into L-Track or PROTEKTOR floor anchorages. Single rail with integral red knob twist-lock secures without tools. Key Features Twist-Lock Security: Red knob tightens by hand—no tools required for positioning. Universal Track Fit:…
Wheelchair Tie Down Easy Storage Bag Wheelchair Tie-Down Easy Storage Bag keeps restraint systems organized, accessible, and ADA-compliant when not in use. This durable pouch secures 4 retractors, lap belt, and shoulder belt near wheelchair positions in buses, vans, or shuttles. Key Features Full Kit Capacity: Stores 1 complete wheelchair restraint system (4 retractors, 1 lap…
Protektor® Emergency Web Cutter Protektor® Emergency Web Cutter provides fast, safe cutting of locked wheelchair restraints or seat belts during vehicle evacuations. This compact, ergonomic tool ensures caregivers and drivers can quickly free passengers in accidents. Key Features Rapid Evacuation: Cuts stuck/locked belts instantly—critical for wheelchair transport accidents. Child-Safe Design: Recessed blade channel protects small fingers;…
Wheelchair Easy Pull Optional Extra-Long Wiring Harness The Wheelchair Easy Pull Optional Extra-Long Wiring Harness is a 4 ft replacement/upgrade cable designed specifically for the AMF Bruns Easy Pull rear-entry winch and restraint system. KEY FEATURES: System-specific part: Electrical harness designed only for the Easy Pull wheelchair winch/restraint system. Extra-long length: 4 ft harness option…
End Cap for Insert Track AMF Bruns 200261840 End Cap completes PROTEKTOR Insert/Flange Track installations with tapered edges that prevent snags on wheelchair casters and clothing. KEY FEATURES: Tapered Safety Edge: Reduces caster catches and clothing snags on track ends. Insert/Flange Track Compatible: Precision fit for PROTEKTOR track installations. Professional Appearance: Clean finish enhances commercial…
End Cap for Insert Track AMF Bruns 200261878 End Cap provides professional finish for PROTEKTOR Surface Track installations with rounded edges to prevent snags on wheelchair components. KEY FEATURES: Rounded Safety Edge: Prevents wheelchair casters and clothing from snagging. Surface Track Compatible: Designed specifically for PROTEKTOR Insert/Surface tracks. Professional Finish: Clean appearance enhances vehicle interior…
Floor Pocket for L-Track PROTEKTOR® Floor Pocket for L-Track provides discreet surface-mount oval anchorages for wheelchair securement systems. Kit includes M10 x 70mm bolt, washer, and nut for simple single-bolt installation. Key Features Surface-Mount Design: No floor modification; single M10 bolt secures permanently. Caster-Friendly Profile: Low 70mm height prevents wheelchair wheel hang-ups. Side L-Track Guides: Keeps…
L-Track Floor Pocket L-Track Floor Pocket conceals wheelchair securement tracks when not in use while enabling fast deployment for tie-downs. Component Parts: Qty 4 M10 bolts Qty 4 70 mm / 2.76” long Qty 4 Washers Qty 4 Nuts Key Features Recessed Storage: Keeps L-Track flush when stowed; deploys instantly for securement. Hardware Pack: Six each M10 x 70mm…
L-Track Floor Pocket L-Track Floor Pocket (6-Pack Hardware Kit) provides recessed anchor points for wheelchair tie-down systems, including six each of M10 x 70mm bolts, washers, and nuts for complete installation. Included In Pack: Qty 6 M10 bolt Qty 6 70 mm / 2.76” long Qty 6 Washer Qty 6 Nut Key Features Complete Hardware: Six…
Sani-Station For Vehicles & Indoors Sani-Station for Vehicles & Indoors delivers hands-free hygiene at wheelchair height with 36″ pedal-operated dispenser stand, 32oz refillable sanitizer bottle included. Crash-tested to 30mph/20G standards for secure vehicle mounting. Key Features Pedal Operation: Touchless dispensing eliminates cross-contamination in high-traffic vehicles. Universal Mounting: 3 pre-drilled holes fit L-Track or floor bolt patterns;…